Triumph Street Triple 765 RS - 2022

All race bike parts for sale. Thanks for looking.

What have we here?

Having spent a year or so building a mega track and race bike from a new spec 2022 Triumph 765 Street Triple RS it is time to move onto a new project.

There are two equally setup bikes, so two lots of everything is for sale. Photos are shown of the assembled bikes prior to strip down. Many, if not all, of the parts listed are applicable to the Daytona and Street Triple 675 as well, but you are responsible for checking.

 

Pricing and some overall photos are shown below. Please use the links provided to see each item in far more detail.

 

Update: A lot of parts have now been sold. We have tried to reflect this on all listings but may have missed one or two. Please contact us for up to date info.

Guide Prices

Please contact us if you wish to discuss any of the items.

 

2* Triumph 765 engine work with the following completed by Pete Hickman Racing

Work done includes: Porting, Cams, Kit Valve Springs, Head Skim, Head gasket, Billet Cam Chain Guide – Each engine has completed no more than 2 endurance races and a couple of track days. They are both putting out mid 140’s bhp.  Price per engine £3500.00

Note the engines are fitted with a Daytona 675 sump to allow the fitment of a moto2 exhaust system.

2* Spark full titanium Moto2 systems – These will come with the Spark Titanium end can and an MHP can. With the later fitted, they have been noise tested at 101db. Priced at £1700.00 per exhaust. 

2* BORA Triumph 765 Supersport Radiator. Including Bora Lower Radiator Bracket & Radiator Guard. NOW SOLD

2* Triumph 765 Solo Engineering WSS electronics kit. Selling as a package including solo 765RS loom, WSS600_A ECU (MKE7), Solo WSS Advanced Display, Power Switch, LHS Switchgear, RHS Switchgear, Quickshifter, GPS receiver, lambda sensor and Can Cable adaptor (you'll need a seperate data cable requried for programming) £3800.00 each.

4* Sets of Triumph 765 OZ GASS RS Wheels – There will be the odd mark on them from wheel and tyre changes but nothing more than that. Each comes with a set of captive spacers on both the front and rear. £2000.00 per set. 

4* Sets of Triumph 765 Brembo 310mm diameter T-Drive Front Discs. All in excellent condition, having only covered minimal track and race mileage. £450.00 per set

4* standard rear brake discs £50.00 per disc

2* Sets of Triumph 765RS front Brembo radial brake calipers, excellent condition, with pads. 100mm spacing. £350.00 per set.

2* Sets of Triumph 765RS Front Forks, containing Ktech DDS pro cartridge kits and Ktech fork extenders. These have been adapted for quick our endurance quick release setup, which included the removal of the standard mudguard mount, which was replaced with a Fast Frank mount. This enabled the forks to pivot without the need to remove the mudguard. £1200.00 per set

2* Triumph 765RS Ktech DDS Pro rear shocks, fitted with adapters to run a 75mm rear suspension potentiometer. £1000.00 per shock

 2* Ktech Race Steering Dampers and Triumph 675 fitting kits. We utilised the Ktech fork extenders to enable us to fit these to the top of the forks on the 765. £380.00 each.

2* Motoholders Triumph 675 rear subframes. £250.00 each

2* Motec L120 Data loggers, inc license for internal storage data logging. These include the adapter to connect to the a CANBUS system £1000.00 each

2* Mektronics Front Suspension Pot 150mm £100.00 each

2* Mektronics Rear Suspension Pot 75mm £100.00 each

2* Solo Engineering / PHR Racing WSS Triumph 765 clock mounts. With brackets required to fit the Solo WSS Advanced Display ( I think we have 1 bracket for standard clocks if somebody is interested in using it ) £150.00 each

2* Harris adapted Triumph 765 swingarms. Can be supplied with spacers to work with the Oz wheels but will require different spacers to be made if being used with the standard wheels. Complete with the underslung caliper bracket and paddock stand lifters but no brake caliper £1200.00 each.

2* Solo Engineering (homologated for WSS / BSS) top yokes for the Triumph 765. These work with the standard bottom yoke and are setup for use with clip ons. £200.00 each

1* PHR carbon airscoop for the Triumph 765 to work with 675 race fairing £200.00

2* PHR ECU anti vibration brackets to mount the WSS ECU to the 765RS Airbox. £60.00

3* Sets of Triumph 765 Spider Rearsets £350.00 each set

3* Sets of 50mm Spider Clip Ons with 25mm offset. £120.00 per set

1* UKRaceSupport linear rear suspension linkage setup for the Triumph 765RS. £200.00

 

Others
- 2x Brembo - Billet CNC P2 Hard Anodized Rear Brake Caliper - £350 each
- 2x PHR race lock stop fitments £50
- 2x Fuel tanks including fuel pump £350
- 2x Race Fuel filler caps £35
- 2x Plastic seat undertrays £25
- 2x CRC Triumph Daytona 675 2013> / Street Triple 765 17> Complete Set of Race Fairings & Seat with Seatpad, mudguard and tank cover £350

 

This field is mandatory

* Indicates required fields
There was an error submitting your message. Please try again.
Thank you! We will get back to you as soon as possible.

Contact us with your questions

We need your consent to load the translations

We use a third-party service to translate the website content that may collect data about your activity. Please review the details in the privacy policy and accept the service to view the translations.